HauteReciver Manual
Wireless Module Instructions Guide
1. While the device is powered off, press and hold 「Turbo」,「-」 and 「Home」 simultaneously for 3 seconds to enter wireless pairing mode.
2. Insert the wireless receiver into the computer’s USB port, then press and hold the 「+」 button for 2 seconds to enter wireless pairing mode.
Receiver Indicator
In wireless pairing mode, the indicator flashes rapidly.
After successful wireless pairing, the receiver’s green indicator remains solid.
Controller Indicator
In wireless pairing mode, the indicator flashes rapidly.
After successful wireless pairing, the indicator turns off (when not charging).
HauteBox Operation Changes
After installing the wireless module:
Power On: Press and hold the Home button for 3 seconds.
Power Off: Press and hold the Home button for 6 seconds.
Normal Connection
After pairing the wireless device once, it can be used continuously.
For subsequent use, simply power on the device and wait for the wireless connection to be established.
While waiting for the wireless connection, the indicator flashes slowly.
Specifications / Charging
The battery capacity is 3000mAh / 3.7V. It takes approximately 6.5 hours to fully charge. Connect a Type-C cable to charge.
During charging, the HITBOX indicator remains on. When fully charged, the indicator turns off.
Other Settings
1. After connecting the receiver to the computer, press and hold the + button for 2 seconds to enter wireless pairing mode.
2. After connecting the receiver to the computer, press and hold the + button for 6 seconds to enter firmware update mode.
Indicator
In Web Configuration Mode, the indicator flashes rapidly.
Notes
When installing or replacing the joystick module or button module, the device must be powered off.
When using a USB authentication dongle, make sure the device is powered off, insert the USB authentication dongle first, and then connect the device to the game console.
When a USB authentication dongle is connected and successfully recognized, the indicator remains solid white.